There are only a few ways that the chain can be tightened.
Garage door opener chain tension adjustment.
If the door won t stay open to its full extent or doesn t close flush to the ground the travel control needs an adjustment.
Just tighten enough to stop it hitting the rail.
You need proper tension on a garage door to operate the door by hand or with an automatic opener.
Motor unit assembly parts rail assembly parts and installation parts for liftmaster chain drive garage door opener models 1345 1345m 1346 1346m.
How do i adjust it.
How to adjust garage door tension.
A flathead screwdriver is all that is needed to make a limit adjustment on most garage door openers.
Call a professional if you don t feel confident dealing with a spring under this much tension.
Pull the rope that s attached to your garage door opener.
Replacement gear kit if you need one http amzn to 2drtdvc if you.
Adjustment instructions for genie garage door openers may vary by garage door opener model.
Close the garage door.
It will release the door opener from its drive chain.
Contact the genie company directly for model specific adjustment instructions.
Note that because the garage door will be down this will mean.
The remote controls fitted in your car coupled with the motor mechanism attached to a chain that is the heart of a garage opener make the process of moving the door much more convenient.
The springs will be under tension which increases the risk of injury.
There may be an adjustment linked to the chain or an adjustment to the length of the door opener track.
Remember to not over tighten the chain.
Both adjustment types should be done with.
If the tension is too loose the springs that help lift the.
Liftmaster 985 1240 1240r repair parts list and diagrams.
Garage door opener chain adjustment.
If the up travel isn t functioning properly turn the up limit adjustment screw clockwise.
Since then genie has worked hard to make their radio controlled residential garage door openers a household name.
Common problems associated with such systems are caused by the chain loosing its tension.
Follow the article below to learn how to adjust the chain.
Unplug the opener if you have an automatic garage door.