This framing detail explains the minimum.
Garage door framing requirements.
Measure the distance from the bottom plate of the wall to a point that is 1 1 2 inches higher that the garage door height.
How to frame a garage door 1.
How to frame a garage door opening.
Pull a measurement from the floor of your space to the ceiling next to the door opening.
Doortech wants to provide you with as much information as necessary to ensure your garage door installation is trouble free.
It is the owner and or the owners contractor to prepare the opening for the garage door.
Garage doors use either torsion springs or extension springs to raise and lower the door.
Behind the door lies an entire system of components that allow the door to work.
The face of a garage door tells only a portion of the story.
To prepare for the new installation you will need to follow these instructions and pay special attention to the requirements laid out in the sketch below.
This diagram is not intended as designs for building a new garage it shows the minimum framing needs for the installation of an overhead style garage door.
This is the more complicated of the short walls since it contains the overhead door rough opening.
The doors extend beyond the finished trim you see from the front a fact that must be taken into consideration when framing and preparing the area for installation.
Knowing garage door clearance requirements will help you avoid ordering the wrong garage door set up for your needs.
The small walls on each side of an overhead garage door need additional beefy bracing to tie the walls to the foundation as well as the header to the wall talk to your local building official for details.
The plate markings are sort of like a map that you utilize for garage wall framing when building a garage.
Torsion springs mount on a bar above the door while extension springs stretch down the side of the upper tracks.
Frame the rough opening for the garage door to 3 inches wider than the garage door you have selected.